Start-Up And Operation; Contents Of This Chapter; Tools Needed; Prerequisite - ABB PVS-100 Series Hardware Manual

Start-up and operation

Contents of this chapter

This chapter describes the start-up procedure of the PVS-100/120 medium voltage compact
skid (MVCS) and the general operation criteria.
WARNING!
Only an authorized electrician is permitted to install the cabling to the MVCS. Obey
the Safety instructions (page 9)
physical injury or death, or damage to the equipment may occur.
WARNING!
Do not do electrical installation work during a thunderstorm.

Tools needed

• Voltage detector
• Insulation resistance meter. For more information, see section
resistance of the cabling (page
• Personal protective equipment

Prerequisite

WARNING!
Use original silica gel bags only during transport. Install new silica gel bags for
storage.
1. Remove the transportation covers.
and the local safety regulations. If ignored,
42).
Start-up and operation 49
8
12
Measuring the insulation