Type Designation Key; Mvcs Optional Codes - ABB PVS-100 Series Hardware Manual

26 Hardware description

Type designation key

The type designation describes the composition of the unit. The type designation is visible
on the type designation label which is attached to the unit. The complete type designation
is divided into sub codes:
• The first 1...18 digits form the basic code which describes the basic construction of the
unit. The fields in the basic code are separated by hyphens.
• The option codes follow the basic code. Each option code starts with an identifying letter
(common for the whole Product Series), followed by descriptive digits. The option codes
are separated by plus signs.
The following table describes the fields of the basic code and the option code. Refer to the
items of figure in Type designation
Example: PVS-100/120 - MVCS - XXXX - Y + Options
Item Description
D PVS-100/120 = Inverter model
E MVCS = Station type
Power rating
XXXXkVA
F
See chapter
LV voltage
G -Y = 480 V
-Y = 400 V
H Option (plus) codes for additional upgrades
￭

MVCS optional codes

Code Name
+TRECO Oil transformer ECO
losses
+TR36kV Oil transformer 36kV
+TR50Hz Oil transformer 50Hz
+TRC5 C5 corrosion
protection
degree for
transformer
+TRIn Inrush current
+ATR20 Auxiliary transformer
power rating
+ATR30 Auxiliary transformer
power rating
label.
Technical data (page 61).
Description
MV oil transformer
Standard losses oil transformer is replaced with eco losses oil trans-
former
Oil transformer 22kV is replaced with Oil transformer 36kV
Oil transformer 60 Hz is replaced with oil transformer 50 Hz
Oil transformer corrosion protection degree C4 is replaced with
C5 corrosion protection degree
Oil transformer inrush current is replaced with a lower one
Auxiliary services
Standard 10 KVA auxiliary service transformer is upgraded to a 20 KVA
400/230 V auxiliary service transformer
Standard 10 KVA auxiliary service transformer is upgraded to a 30 KVA
400/230 V auxiliary service transformer