Huawei SUN2000-2KTL-L0 User Manual page 9

SUN2000-(2KTL-5KTL)-L0
User Manual




Electrical Connections
Before connecting cables, ensure that the SUN2000 is secured in position and not damaged in
any way. Otherwise, electric shocks or fire may occur.



Operation
The high voltage generated by the SUN2000 during operation may cause an electric shock,
which can result in serious property damage, serious injury, or death. Strictly comply with the
safety precautions in this document and associated documents when operating the SUN2000.
Issue 01 (2018-08-30)
Figure 1-1 Installation clearances
Ensure that the SUN2000 is installed in a well-ventilated environment.
Ensure that the SUN2000 heat sinks are free from blockage.
Do not open the front panel of the SUN2000.
Do not remove the terminals and ports at the bottom of the SUN2000.
Ensure that all electrical connections comply with the local electrical standards.
Obtain approval from the local utility company before using the SUN2000 to generate
electricity in grid-tied mode.
Ensure that the cables used in a grid-tied PV system are properly connected and insulated
and meet all specification requirements.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
3