Huawei SUN2000-2KTL-L0 User Manual page 46

SUN2000-(2KTL-5KTL)-L0
User Manual

Pay attention not to damage the core wire when stripping a cable.

The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.

Wrap the wire crimping area with heat shrink tubing or PVC insulation tape. The
following figure uses heat shrink tubing as an example.

When using the heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(A) Core wire
(D) Hydraulic pliers
Step 2 Connect the PE cable.
Ensure that the PE cable is connected securely.
Issue 01 (2018-08-30)
(B) Insulation layer
(E) Heat gun
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(C) Heat shrink tubing
40