Huawei SUN2000-2KTL-L0 User Manual page 53

SUN2000-(2KTL-5KTL)-L0
User Manual

Cables with high rigidity, such as armored cables, are not recommended as DC input
power cables, because poor contact may be caused by the bending of the cables.

Before assembling DC input connectors, label the cable polarities correctly to ensure
correct cable connections.

After crimping the positive and negative metal contacts, pull the DC input power cables
back to check that they are connected securely.

Insert the crimped metal contacts of the positive and negative power cables into the
corresponding positive and negative connectors. Then pull back the DC input power cables
to check that they are connected securely.
Figure 5-11 Assembling DC connectors (using metal cold forming contacts)
(A) Positive metal contact (B) Negative metal contact (C) H4TC0001 crimping tool
(D) Positive connector
Issue 01 (2018-08-30)
(E) Negative connector
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(F) H4TW0001 open-end wrench
47