Suzuki SY413 Service Manual page 3400

1B-6 AIR CONDITIONING (OPTIONAL)
1. Horn
2. Hood lock member
1. Receiver outlet pipe
ON-VEHICLE SERVICE
REFRIGERATING SYSTEM
CONDENSER
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Recover refrigerant by using recovery and recycling equip-
ment. Be sure to follow the instruction manual for the equip-
ment.
The amount of compressor oil removed must be measured and
the same amount added to the system.
3) Remove front bumper referring to "FRONT BUMPER" in Sec-
tion 9 of the Service Manual as mentioned in FOREWORD of
this manual.
4) Disconnect compressor discharge hose from condenser inlet
fittings.
NOTE:
As soon as above hose and pipe are disconnected, cap
opened fittings so that moisture and dust do not enter into
condenser.
1. Discharge hose
5) Remove horn.
6) Remove hood latch and hood lock member.
7) Disconnect coupler from dual pressure switch.
8) Remove receiver outlet pipe.
2. Joint