Suzuki SY413 Service Manual page 3150

1. ECM 3. Bolt
2. Glove box
ENGINE AND EMISSION CONTROL SYSTEM (G13/G16 ENGINE WITH WU TWC) 6E2-11
AIR INTAKE SYSTEM
THROTTLE BODY
Refer to Section 6E1.
IAC VALVE
Refer to Section 6E1.
FUEL DELIVERY SYSTEM
FUEL PUMP
Refer to Section 6E1.
FUEL PRESSURE REGULATOR
Refer to Section 6E1.
FUEL INJECTOR
Refer to Section 6E1.
ELECTRONIC CONTROL SYSTEM
ENGINE CONTROL MODULE (ECM)
CAUTION:
As ECM consists of precision parts, be careful not to ex-
pose it to excessive shock.
REMOVAL
1) Disconnect battery negative cable at battery.
2) Disable air bag system, refer to DISABLING THE AIR BAG
SYSTEM in SECTION 10B.
3) Open glove box, then while pressing glove box stopper, pull out
glove box from instrument panel.
4) Remove ECM from body after removing its bolts.
5) Disconnect couplers from ECM while releasing coupler lock.
INSTALLATION
1) Connect couplers to ECM securely.
2) Install ECM to body.
3) Install glove box.
4) Enable air bag system, refer to ENABLING AIR BAG SYSTEM
in SECTION 10B.
5) Connect battery negative cable at battery.