Ethernet Pass-Through Module - Dell PowerEdge M605 Hardware Owner's Manual

Ethernet Pass-through Module

The Ethernet pass-through module supports 10/100/1000 Mb connections,
and provides a direct connection between the optional internal Ethernet
mezzanine card in the blade, and an external Ethernet device (see
Figure 1-23). The Ethernet pass-through modules are hot-pluggable, and may
be installed in any of the three Fabrics. Table 1-17 lists the functionality of
the Ethernet pass-through module indicators. For additional information on
installing this module, see "I/O Modules" on page 166.
64
About Your System