Installing The System Board; Power Pass-Through Board - Dell PowerEdge VRTX Owner's Manual

Enclosure
Hide thumbs Also See for PowerEdge VRTX:
Table of Contents

Advertisement

Installing The System Board

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Unpack the new system board assembly.
2.
Holding the system board by the system board handle and the system board holder, angle it toward the back of the
chassis.
3.
Slide the system board toward the back of the chassis, until the CMC connectors align with the chassis slots.
4.
Align the system board with the guide pins on the chassis and lower it into the chassis.
5.
Lower the system board handle until it engages with the securing pins on the chassis.
6.
Tighten the spring-loaded screw on the system board handle to secure it to the chassis.
7.
Replace the following:
a) integrated storage controller card
b) CMC cards
c) power distribution board
d) PCIe cage
e) hard-drive backplane
f) backplane expander board
g) cooling-fan assembly
h) cooling shroud
8.
Reconnect all cables to the system board.
9.
Close the system.
10. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
11. Reinstall the following:
a) hard drives
b) server modules
c) power supplies
12. Reconnect the enclosure to its electrical outlet and turn the enclosure on, including any attached peripherals.
13. Turn on the server modules using the operating system commands or the CMC.
14. If applicable, install the front bezel.
15. Import your new or existing iDRAC Enterprise license. For more information, see
support/manuals.

Power Pass-Through Board

The power pass-through board supplies power from the power distribution board to the enclosure midplane.
iDRAC7 User's Guide , at dell.com/
127

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge m520Poweredge m620Poweredge m820

Table of Contents