Installing Blade Components - Dell PowerEdge M605 Hardware Owner's Manual

Installing Blade Components

The procedures in this section describe how to remove and install
components in a blade, including:
• Memory modules
• I/O module mezzanine cards
• NIC TOE and iSCSI activation key
• Processors
• Hypertransport (HT) bridge card (service only)
• Blade system board NVRAM backup battery (CMOS battery)
• Hard drives
• Video controller daughter card or riser card
• Hard-drive backplane
• System board (service only)
• Storage controller card (service only)
Installing Blade Components
95