ABB ACS355 Supplement Manual page 25

All parameters
No. Name/Value
99 START-UP DATA Language selection. Definition of motor set-up data.
9902 APPLIC
MACRO
ABB
STANDARD
3-WIRE
ALTERNATE
MOTOR POT
HAND/AUTO
PID CONTROL PID control. For applications in which the drive controls a
TORQUE
CTRL
AC500
MODBUS
LOAD FD SET FlashDrop parameter values as defined by the FlashDrop
USER S1
LOAD
USER S1
SAVE
USER S2
LOAD
Description
Selects the application macro.
Standard macro for constant speed applications
3-wire macro for constant speed applications
Alternate macro for start forward and start reverse
applications
Motor potentiometer macro for digital signal speed control
applications
Hand/Auto macro to be used when two control devices are
connected to the drive:
• Device 1 communicates through the interface defined by
external control location EXT1.
• Device 2 communicates through the interface defined by
external control location EXT2.
EXT1 or EXT2 is active at a time. Switching between
EXT1/2 through digital input.
process value, eg pressure control by the drive running the
pressure boost pump. Measured pressure and the pressure
reference are connected to the drive.
Torque control macro
AC500 PLC macro.
file. Parameter view is selected by parameter 1611
PARAMETER VIEW.
FlashDrop is an optional device for fast copying of
parameters to unpowered drives. FlashDrop allows easy
customization of the parameter list, eg selected parameters
can be hidden. For more information, see MFDT-01
FlashDrop user's manual (3AFE68591074 [English]).
User 1 macro loaded into use. Before loading, check that
the saved parameter settings and the motor model are
suitable for the application.
Save User 1 macro. Stores the current parameter settings
and the motor model.
User 2 macro loaded into use. Before loading, check that
the saved parameter settings and the motor model are
suitable for the application.
Actual signals and parameters 25
Def/FbEq
ABB
STANDA
RD
1
2
3
4
5
6
8
10
31
0
-1
-2