Installing The Backup Battery - Risco Agility 3 Installer Manual

Agility 3 Installer Manual

Installing the Backup Battery

Agility 3 has a safety approved, sealed lead acid 6V, 3.2 Ah rechargeable backup battery
for use in case of a power failure:
WARNING: Risk of explosion exists if battery is replaced by an incorrect type.
CAUTION: Install with correct polarity.
CAUTION: Dispose of used batteries according to applicable law and regulations.
To install the backup battery:
1. Remove the battery cover screw (see Figure 4, detail 3) and pull the cover outward.
2. Insert the battery into its place and attach the connectors with the correct polarity.
3. Reinstall the battery cover and secure it with the locking screw.
NOTE: The rechargeable battery should be charged for at least 24 hours.
Figure 4: Battery Compartment
Page 23