Testing Menu - Risco Agility 3 Installer Manual

Audio Messages: Local Messages
Parameter
Intruder alarm
Fire alarm
Emergency
Panic alarm
Tamper alarm
Environmental
alert
Away arm
Stay arm
Disarm
Audible Status
Exit / Entry
Auto arm
Output On/Off
Walk test
No Movement
Miscellaneous

Testing menu

The following menu is used to perform tests on the system. Note that each test refers to the
last time the device was activated. Tests can be performed on the following elements:
1. Main Unit
2. Zone
3. Remote Control
4. Keypad
5. Siren
6. GSM
7. IP Unit
8. UO Unit
Description
Intruder alarm
Fire alarm
Emergency (medical) alarm
Panic alarm
Tamper alarm
Flood, Gas, CO or Temperature alert
System/Partition armed in Away(Full arm)
System/Partition armed in Stay(Part set arm)
System/Partition disarmed
Status heard when clicking the status button on the
keypad/remote control
System in exit or entry delay
System in auto arm process
Output activated or deactivated (Outputs defined as
Follow Code)
Walk test. The Agility 3 will sound the zone number
and description
No movement message
Chime status and Macro messages
Page 130
Agility 3 Installer Manual
Default
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No