Siemens SINAMICS S120 System Manual page 8

Preface
EC Declaration of Conformity, certificates, certifications, manufacturers declarations
You can find the EC Declaration of Conformity for the relevant directives as well as the
relevant certificates, prototype test certificates, manufacturers declarations and test
certificates for functions relating to functional safety ("Safety Integrated") in the Internet at
the following address (https://support.industry.siemens.com/cs/ww/en/ps/13231/cert).
You can obtain an up-to-date list of currently certified components on request from your local
Siemens office. If you have any questions relating to certifications that have not yet been
completed, please ask your Siemens contact person.
Note
You can find certificates for the North American market on the Internet page of the certifier:
• For products with UL certificate
bin/XYV/template/LISEXT/1FRAME/index.html)
• For products with TÜV SÜD certificate
sued.de/industry_and_consumer_products/certificates)
• For products with CSA certificate
certification/certified-product-listing)
Low-Voltage Directive
When operated in dry areas, SINAMICS S units conform to the Low-Voltage Directive
2006/95/EC.
EMC directive
SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2014/130/EEC in the configuration
specified in the associated EC Declaration of Conformity for EMC and when the
Configuration Manual EMC Installation Guideline, article number 6FC5297-0AD30-0☐P☐, is
implemented.
EMC limit values in South Korea
The EMC limit values to be observed for Korea correspond to the limit values of the EMC
product standard for variable-speed electric drives EN 61800-3 of category C2 or the limit
value class A, Group 1 to CISPR11. By implementing appropriate additional measures, the
limit values according to category C2 or limit value class A, Group 1, are observed. Further,
additional measures may be required, such as using an additional radio interference
suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the EMC Installation Guideline Configuration Manual.
The final statement regarding compliance with the standard is given by the respective label
attached to the individual unit.
8
(http://database.ul.com/cgi-
(https://www.tuev-
(http://www.csagroup.org/de/en/services/testing-and-
System Manual, 04/2015, 6SL3097-4BA00-0BP1
Hydraulic Drive