Table of Contents
Advertisement
RRU3268
Installation Guide
9.5 Installing an RRU PGND Cable
This section describes the procedure for installing an RRU PGND cable.
Context
The cross-sectional area of an RRU PGND cable is 16 mm
OT terminal at one end and an M8 terminal at the other end.
Procedure
Step 1 According to the actual cable route, cut the PGND cable into a proper length to prepare an RRU
PGND cable. Then add an OT terminal at each end of the cable according to the instructions in
Assembling the OT Terminal and the Power Cable.
Step 2 Install the RRU PGND cable.
Connect the M6 OT terminal at one end of the PGND cable to the ground terminal at the RRU
bottom and the M8 OT terminal at the other end to the external ground bar, as shown in
9-10.
Figure 9-10 Installing an RRU PGND cable
Issue ()
NOTE
Crimp OT terminals in correct positions, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing RRU Cables
2
2
(0.025 in.
). The cable has an M6
Figure
9-11.
Figure
99
Hide quick links:
Advertisement
Table of Contents
