Table of Contents
Advertisement
RRU3268
Installation Guide
Procedure
Step 1 Close the clips for the installed cables. Use a torque screwdriver to tighten the screws on each
clip to 1.4 N·m (12.39 lbf·in.), as shown in
Ensure that the exposed shield layer of the power cable is properly tightened using the clip.
Figure 9-24 Closing clips
Step 2 Insert waterproof blocks into vacant cable troughs in the cabling cavity, as shown in
9-25.
Ensure that cables and waterproof blocks are properly inserted into troughs.
Issue ()
CAUTION
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
9-24.
9 Installing RRU Cables
Figure
113
Hide quick links:
Advertisement
Table of Contents
