Chapter 2: Board Setup And Configuration; Board Component Location - Xilinx ZCU102 User Manual

Board Setup and Configuration

Board Component Location

Figure 2-1 shows the ZCU102 board component locations. Each numbered component
shown in Figure 2-1
the respective schematic page numbers, and links to a detailed functional description of the
components and board features in
Figure 2-1
IMPORTANT:
board. (This user guide documents ZCU102 Rev. 1.0 and later.)
There could be multiple revisions of this board. The specific details concerning the
IMPORTANT:
differences between revisions is not captured in this document. This document is not intended to be a
reference design guide and the information herein should not be used as such. Always refer to the
schematic and xdc of the specific ZCU102 version of interest for such details.
Electrostatic discharge (ESD) can cause board damage. Follow standard ESD prevention
CAUTION!
measures when handling the board.
ZCU102 Evaluation Board User Guide
UG1182 (v1.2) March 20, 2017
is keyed to Table 2-1. Table 2-1
Chapter
is for visual reference only and might not reflect the latest revision of the
www.xilinx.com
identifies the components, references
3.
Chapter 2
11
Send Feedback