FastMile Home Outdoor Modem User Manual
assessment, the Controller re-assigns a new cell for the Home Outdoor Modem. The Home
Outdoor Modem shall start with factory-default behavior (i.e. get a new Cell Id to be used).
Figure 37
Cell re-assignment during Home Outdoor Modem Installation Procedure
4.1.5.2 Other cell re-selection cases
Root cause(s):
Home Outdoor Modem is placed to the wrong wall.
The manual tilt is at a wrong position.
The serving cell may be down.
Release 17.10
DN09218237, Issue 03 Draft
28.11.2017
© 2017 Nokia
Troubleshooting
40