ABB MB3000 Series Installation And User Manual page 38

Removing the Source Module
STEP 2
Do not discard the four screws: they will be required to reinstall the front panel.
STEP 3
STEP 4
32
Remove with a 2.5 mm Hex driver the 4 screws holding the front panel in
place.
Figure 7- 3. Front panel captive screws
Slide down and remove the front panel from the spectrometer.
Unscrew with a 2.5 mm Hex driver the bracket holding the Source Electronic
Board.
Figure 7- 4. Source module: Source control board and source
Section 7 Module Replacement
AA003700-01 rev. G. 2.0