ABB MB3000 Series Installation And User Manual page 20

Installing the Spectrometer
STEP 1
STEP 2
STEP 3
14
Figure 3- 3. Installation procedure: Network connection
Connect the Ethernet cable to the computer or to the Network port. Use a
crossover cable for a private connection (spectrometer to computer), and a
straight pin cable for a Network connection (spectrometer to Network).
Connect the Ethernet cable to the spectrometer.
If desired, connect the purge hose to the spectrometer (dry oil-free air or
nitrogen only, recommended 7 l/min.).
Section 3 Unpacking and Installing
AA003700-01 rev. G. 2.0