The clerk will ask for the five (5) encrypted codes that appear directly beneath Do Phone Update. Read them from top to
bottom (Figure 59).
The clerk will give four codes to enter in the fields to the immediate right.
After the proper codes have been entered (from top to bottom), click Update.
Upon clicking Update, three more codes will be displayed directly beneath Do Phone Update (Figure 60).
The Totalflow representative will ask for the three codes to verify that the credits have been properly written to the credit
key.
When finished, click Update.
Transferring credits from credit key to device
Credits can be transferred to the XRC
transferred.
NOTE: If XRC
meters. See section 3.6.5, Transferring credits from device to credit key later in this section.
To transfer application credits to the G4 device, connect to the G4 unit with PCCU32 7.0 (or later).
Figure 59: Application credit entry screen
Figure 60: Application Credit Verification Codes
G4
device. The user selects the type of credit and the amount of those credits to be
G4
has a surplus of credits, these credits can be transferred to the credit key to be used on other
62