ABB XSeriesG4 User Manual page 15

Hide thumbs Also See for XSeriesG4:
Table of Contents

Advertisement

RS-232 and RS-485 communication modules that plug directly into the board. The XRC
output points:
5 analog inputs
4 DI/PI inputs can be used as high-speed (20KHz) counters, or as status indicators (Selectable Debounce enable/disable)
4 digital outputs
2 Remote Communication Ports (RS-232 or 485)
I/O interface for TFIO interface modules
CPU engine card
The CPU engine card (2102427-xxx) plugs into the XRC
All processor and memory components reside on the CPU engine card. The engine card uses a low power processor running at
192 MHz with 16M SRAM, 32M Flash and 256 bytes of serial E2PROM. A lithium backup battery is located on the main XRC
board. Unplugging the engine card disconnects it from the lithium cell backup and SRAM (historical flow data) is cleared.
Application programs and configuration files are stored in non-volatile Flash.
Communication enclosure
A removable communications enclosure can be provided that has been pre-drilled for mounting many popular communications
devices such as radios, cellular phones, modems, etc. This feature is not available in the XRC
Battery compartment
G4
The XRC
system houses an internal main battery.
G4
XRC
6490: The battery sets in a central compartment directly behind the battery plate.
G4
XRC
6790: The battery sets in a central compartment directly behind a hinged cover plate holding the DIN rail and
installed modular components.
G4
XRC
6890: The battery sets on the floor of the main compartment and houses the various optional battery packs that are
G4
available for the XRC
Solar panel
G4
The XRC
is configurable for a 10-Watt, 20-Watt or 30-Watt solar panel. The panel is designed for mounting on a 2-inch
extension pipe above the XRC
installations, solar panel chargers must be configured to mount outside of the building.
Additional features
Additional features of the Totalflow System include the following:
A Programmable bi-level security system prevents unauthorized communication and configuration of the XRC
section 3.5.6, Bi-Level security system for more information.
An internal crystal controlled clock provides a highly stable time base for the system.
Optional battery packs extend operation for longer periods without power.
Three available charging sources include:
– External solar panel (standard)
– External AC power
– External 24/12 Vdc power
The LCD (Liquid Crystal Display) is programmable to allow the monitoring of operations (displays flow rate, volumes, etc.)
The rugged, aluminum, powder-coated NEMA 4X enclosure is lockable to prevent internal access.
An optional ability allows rapid data collection over several communication links.
Additional I/O for valve control, pressure, level monitoring, remote communication, etc. are available.
An optional keypad is available.
, from one 8 ampere hour battery up to two 70 ampere hour batteries.
G4
, on top of or to the side of a meter house. As the XRC
G4
board.
XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 3
1 System overview
G4
board offers the following input and
G4
6990.
G4
6990 is not designed for outside
G4
G4
. Go to

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrcg4 6790Xrcg4 6890Xrcg4 6490Xrcg4 6990

Table of Contents