ABB XSeriesG4 User Manual page 62

Select Communications> Network tab from the navigation tree. The Network screen displays with options to configure
the Ethernet port or Network Adaptor (Figure 49).
In the Network ID field, type a name that helps to identify the device uniquely.
Set Network Adaptor to Enable.
Configure the IP parameters. Select one of the options based on your addressing method.
a.
If using DHCP for dynamic addressing, set Enable DHCP to Yes (Figure 49). Leave the additional default IP
configuration intact as it will auto-configure after Ethernet is activated.
Figure 49: Network tab: Enable DHCP for dynamic addressing
50