Huawei SmartLogger2000 series Quick Manual page 30

Login screen
Quick settings
1. If the SmartLogger is powered on for the first time or the factory defaults are restored and
parameter configuration is not performed on the embedded WebUI, the Quick Settings screen
is displayed when the SmartLogger connects to the app. You can set parameters based on site
requirements. After parameters are set, the main menu is displayed when the SmartLogger
connects to the app again.
2. On the Quick Settings screen, tap
settings and enter the main menu.
3. In the Income pane, when Currency factor is 0 (default value), Income is --. You can set
Currency factor on the app.
4. In the Grid scheduling pane, if there is no active power scheduling, P = NA is displayed. If there
is no reactive power scheduling, PF = NA is displayed. For operations related to grid scheduling,
see the SmartLogger2000 User Manual.
5. You can modify the parameters based on site requirements. For details about parameter
configuration, see the SUN2000 APP User Manual.
Select Bluetooth
connection
Main menu
to return to the login screen. Then tap OK to confirm the
29
Connecting Bluetooth
NOTICE
1. The SmartLogger Bluetooth is named as
LOG+the last eight figures of the SN of the
SmartLogger.
2. The login password is the same as that for
the SmartLogger connected to the app and is
used only when the SmartLogger connects to
the app.
3. The preset password for Common User,
Advanced User, and Special User is
00000a. Use the preset password upon initial
login. To ensure account security, change the
password immediately after login.
Switching
between users