Model Description - Huawei SmartLogger2000 series Quick Manual

1. The information in this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure accuracy of the contents. However, all statements,
information, and recommendations in this document do not constitute a warranty of any kind,
express or implied.
2. Before installing the device, carefully read the SmartLogger2000 User Manual to get familiar with
the product information and precautions. SmartLogger is short for SmartLogger2000 in the
following text.
3. Install and use the device according to this document and the user manual. Otherwise, the device
may be damaged. Use insulated tools when installing the device.
4. When the SmartLogger is applied in a non-Huawei smart array controller (smart array controller
for short), install it in the third-party cabinet. This section describes the installation and cable
connection operations using the SmartLogger in non-Huawei smart array controller scenario as
an example.
1
Overview
1.1

Model Description

Model
SmartLogger2000-10
SmartLogger2000-10-B
SmartLogger2000-11-B
The SmartLogger with a built-in PLC CCO can work with the SUN2000 integrated with the PLC

station (STA) to implement PLC networking.
If the SmartLogger with no built-in PLC CCO needs to work with the SUN2000 integrated with the

PLC STA to implement PLC networking, an external PLC CCO needs to be connected.
The Bluetooth module embedded in the SmartLogger2000-10 supports only the Android app. The

Bluetooth modules embedded in other models of SmartLoggers support both the Android app
and the iOS app.
This document uses the SmartLogger2000-10-C as an example to describe typical scenarios and

cable connections.
Description
10: with a built-in 500 V
AC PLC central
coordinator (CCO)

10-B: with a built-in
500 V AC PLC
central coordinator
(CCO)
 11-B: with no PLC
CCO
1
Model
SmartLogger2000-10-C
SmartLogger2000-11-C
N/A
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
Description
 10-C: with a built-in
800 V AC PLC
central coordinator
(CCO)

11-C: with no built-in
PLC CCO
N/A