Huawei SmartLogger2000 series Quick Manual page 24

4. Connect the stripped cable core to the terminal block of the DI port on the SmartLogger.
5. Insert the terminal block into the SmartLogger DI port.
8
Connecting Cables to the AI Port
8
1. The EMI used in Europe and Southeast Asia is composed of sensors that need to connect to
the SmartLogger separately.
2. The SmartLogger can connect to a current-type or voltage-type sensor through an AI port.
3. One sensor connects to one AI port. This document describes only the connection between the
solar radiation sensor and the SmartLogger. Connections between other sensors and the
SmartLogger are the same.
4. For details about the cables and cable connection operations, see the documents delivered with
the sensors. The AI port on the SmartLogger is marked + and –. Connect cables correctly
according to the silk screens.
23