Sanyo PLC-XP200L Owner's Manual page 58

Setting
Enter a PIN code
Use the Point ed buttons on the side control or Number buttons
on the remote control to enter a number.
When using side control
Use the Point ed buttons on the side control to select a number.
Press the Point 8 button to fix the number and move the red
frame pointer to the next box. The number changes to "✳. "
Repeat this step to complete entering a four-digit number. After
entering the four-digit number, move the pointer to "Set. " Press
the SELECT button so that you can change the PIN code lock
setting.
When using remote control
Press the Number buttons on the remote control to enter a
number (p.15). When you complete entering a four-digit number,
the pointer moves to "Set. " Press the SELECT button so that you
can change the PIN code lock setting.
If you fixed an incorrect number, use the Point 7 button to move
the pointer to the number you want to correct, and then enter the
correct number.
If you entered an incorrect PIN code, "PIN code" and the number
(✳✳✳✳) will turn red for a moment. Enter the correct PIN code all
over again.
Change the PIN Code Lock setting
Use the Point 7 8 button to select Off, On1, or On2 and then
move the pointer to "Quit" with the Point d button. Press the
SELECT button to close the dialog box.
Change the PIN Code
The PIN code can be changed to your desired four-digit number.
Press the Point d buttons to select "PIN code change" and press
the SELECT button. The New PIN code input dialog box appears.
Set a new PIN code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN
A NEW PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO
ON PAGE 83, AND KEEP IT SECURELy . IF yOU FORGET yOUR
PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED .
58
Enter a PIN code
After a correct Logo PIN code is
entered, the following dialog box
appears.
Change the PIN code lock setting
Change the PIN code
Use the Point 7 8
buttons to switch
between the options.