Side Control And Indicators - Sanyo PLC-XP200L Owner's Manual

Side Control and Indicators

Side Control
q
w
e
r
t
ON/STAND-By button
q
Turn the projector on or off (pp.26–27).
INPUT button
w
Select an input source (pp.35–37).
MENU button
e
Open or close the On-Screen Menu (p.28).
Point ed7 8 ( VOLUME + / – ) buttons
r
– Select an item or adjust the value in the On-
Screen Menu (p.28).
– Pan the image in Digital zoom + mode (p.44).
– Adjust the volume level (with Point
(p.31).
SHUTTER button
t
Close and open up the built-in shutter. (p.30)
SELECT button
y
– Execute the selected item (p.28).
– Expand or compress the image in the Digital
zoom mode (p.44).
LENS button
u
Enter the focus, zoom, and lens shift adjustment
mode (p.30).
Indicators (on the top panel)
u
y
POWER indicator
i
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode (p.56).
LAMP/ SHUTTER indicator
o
Light red during operations.
Light blue when the shutter is closed (p.75).
LAMP REPLACE indicator
!0
Light orange when the projection lamp reaches its
end of life (pp.64, 76).
buttons)
7 8
WARNING FILTER indicator
!1
– Blink slow when the filter is being scrolled (pp.
61, 75).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.61, 77).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement (pp.60, 61, 77).
WARNING TEMP . indicator
!2
Blink red when the internal temperature of the
projector exceeds the operating range (pp.68, 75-
77 ).
Part Names and Functions
i
o
!0
!1
!2
13