Pointer Function; Wireless Mouse Operation - Sanyo PLC-XP200L Owner's Manual

Basic Operation

Pointer Function

You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.
1
Press the POINTER button to activate the Pointer
function.
2
Use the MOUSE POINTER button to move the Pointer.
3
To cancel the Pointer function, press the POINTER
button again or press any other button.
Pointer
✔ Note:
• You can choose the pattern of Pointer (Arrow/Finger/Dot) in the
Setting Menu (p. 56)

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.
1
Before operating the wireless mouse, connect your
computer and the projector with the supplied USB
cable (p. 22).
When the Pointer function is used, the wireless mouse
is not available.
2
When a USB cable is connected to the computer
and the projector, turn on the projector first, then
the computer. If you turn on the computer first, the
wireless mouse function may not operate properly.
34
MOUSE POINTER button
POINTER button
MOUSE POINTER
button
Move the pointer on
the screen with this
button.
R-CLICK button
Acts as right (click)
mouse button while
the projector and
a computer are
connected with a USB
cable.
L-CLICK button
Acts as left (click)
mouse button while
the projector and
a computer are
connected with a USB
cable.