Available Combination Of Network - Mitsubishi Electric MELSEC iQ-R Series User Manual

No. Name
(10) Ethernet port (P2)
L ER LED
LINK LED

Available combination of network

Ethernet port (P1 and P2) of the RnENCPU can be used in the following network depending on the engineering tool setting.
( GX Works3 Operating Manual)
• Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
The following table lists the available combination of network and setting in GX Works3.
Network
combination
CC-Link IE Controller
Network only
CC-Link IE Field
Network only
Ethernet + CC-Link IE
Controller Network
Ethernet + CC-Link IE
Field Network
*1 The name in parentheses is the abbreviation of the network type.
Precautions
The following item cannot be set for the RnENCPU.
• Ethernet only (Port 1 network type: Ethernet, Port 2 network type: Ethernet)
• Q-compatible Ethernet
1 PART NAMES
24
1.2 CPU Module
Description
PORT2 connector for network. Connect an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
( Page 61 WIRING)
Same as the P1 connector
Setting in GX Works3
*1
Model Port 1 network
type
_RJ71EN71 CC-Link IE Control
(CCIEC)
_RJ71EN71 CC-Link IE Field
(CCIEF)
_RJ71EN71 Ethernet
(E+IEC)
_RJ71EN71 Ethernet
(E+IEF)
Description
Port 2 network
type
CC-Link IE Control P1 and P2 can be connected to
CC-Link IE Controller Network
CC-Link IE Field P1 and P2 can be connected to
CC-Link IE Field Network
CC-Link IE Control P1 can be connected to
Ethernet and P2 can be
connected to CC-Link IE
Controller Network.
CC-Link IE Field P1 can be connected to
Ethernet and P2 can be
connected to CC-Link IE Field
Network.
Remarks
P1 and P2 cannot be
connected to different CC-Link
IE Controller Network.
P1 and P2 cannot be
connected to different CC-Link
IE Field Network.
CC-Link IE Controller Network
cannot be configured in ring
topology.
CC-Link IE Field Network
cannot be configured in ring
topology.