Figure 10 Gateway 3 (G-240W-E) Connections - Nokia Gateway 3 Product Manual

Nokia WiFi Gateway 3 Product Guide
Issue: 01
Figure 10 Gateway 3 (G-240W-E) connections
POTS ports (2) RJ-11
Ethernet ports (4) RJ-45
4 Connect the Ethernet cables to the RJ-45 ports; see Figure
ports.
5 Connect the power cable to the power connector.
Note — Observe the following:
•
Units must be powered by a Listed or CE approved and marked
limited power source power supply with a minimum output rate of
12 V dc, 3 A. The polarity of the power adapter plug must match the
Gateway 3.
6 Power up the unit by using the On/Off power switch.
7 Verify the LEDs and voltage status.
8 Activate and test the services.
3FE-47464-AAAA-TCZZA
GPON LED
GPON
On/off button
ON/OFF
USB ports (2)
USB 1
TEL 1
LAN 1
LAN 3
UPS connector
UPS
Install a Gateway 3 (G-240W-E)
Reset
button
VOIP LED
RESET VOIP
Wi-Fi security button
WPS
USB 2
TEL 2
LAN 2
LAN 4
Power input
POWER
Bottom cover
10 for the location of the RJ-45
28281
51