Application Configuration; Table 36 Access Control Parameters - Nokia Gateway 3 Product Manual

Configure a Gateway 3 (G-240W-E)
8.1.5
102
Table 36 Access control parameters
Field
WAN
Trusted Network Enable
ICMP, Telnet, SSH, HTTP, TR-069,
HTTPS, SFTP
Source IP Start
Source IP End
2 Select a WAN connection from the drop-down menu.
3 Click to enable or disable Trusted Network.
4 Select an access control level for each of the six protocols: ICMP, Telnet, SSH, HTTP,
TR-069, HTTPS, and SFTP for both the WAN and the LAN side.
5 Click Save.
6 Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
7 STOP. This procedure is complete.

Application configuration

The Gateway 3 (G-240W-E) also supports application configuration, including:
•
port forwarding
•
port triggering
•
DDNS
•
NTP
•
UPnP and DLNA
3FE-47464-AAAA-TCZZA
Nokia WiFi Gateway 3 Product Guide
Description
Choose a connection from the drop-down menu
Click to enable or disable
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Issue: 01