Figure 37 Dmz And Alg Window; Table 35 Dmz And Alg Parameters - Nokia Gateway 3 Product Manual

Configure a Gateway 3 (G-240W-E)
Procedure 29
100
DMZ and ALG configuration
1 Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window,
as shown in Figure 37.
Figure 37 DMZ and ALG window
Table 35 describes the fields in the DMZ and ALG window.
Table 35 DMZ and ALG parameters
Field
ALG Config
DMZ Config
WAN Connection List
Enable DMZ
DMZ IP Address
2 Configure ALG.
3 Click Save ALG.
4 Configure DMZ.
3FE-47464-AAAA-TCZZA
Description
Select the check boxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
Choose a WAN connection from the drop-down menu
Select this check box to enable DMZ on the chosen WAN connection
Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
Nokia WiFi Gateway 3 Product Guide
Issue: 01