Checking Crank Case Breather - Beta Marine Beta 14 Installation Manual

49
End cap
Sump pump location:
Beta 14, 16, 20 & 25
Mid engine, starboard side when viewed from the
gearbox end.
Beta 30, 35, 38 & 45T
Forward end, starboard side when viewed from the
gearbox end.
Beta 43, 50, 60, 85T, 90T, 105T & 115T
Aft engine, starboard side when viewed from the gearbox
end.
Beta 70T
Mid engine, starboard side when viewed from the
gearbox end
Beta 75 & 90
Heat exchanger mounted, port side when viewed from
the gearbox end.
CHECKING THE CRANKCASE BREATHER - OIL SEPARATOR
Beta 105T & 115T turbocharged engines are fitted with
a crankcase breather - oil separator which should be
inspected annually and replaced when heavily soiled.
51
Sump pump
Oil filter location:
Beta 14, 16, 20, 25, 30, 35, 38 & 45T
Forward end, port side when viewed from the gearbox
end
Beta 43, 50, 60, 70T & 85T
Forward end, starboard side when viewed from the
gearbox end.
Beta 75, 90, 90T, 105T & 115T
Aft engine, starboard side when viewed from the gearbox
end.
filter, do not allow any contaminant to enter
the relief valve.
This requires removal of the 4 cap screws and lifting it off
the top of the breather main body. Reverse this procedure
for re-assembly. Please refer to image 51 & 52.
54
50
IMPORTANT!
When changing the oil
52