Maintenance Schedule - Beta Marine Beta 14 Installation Manual

Maintenance Schedule

Check engine oil level
Check gearbox oil level
Check engine coolant level
Check battery fluid
Check belt tension
and alternator bolts
Ensure raw water inlet
strainer is clear
Check stern gland lubrication
Drain off any water in fuel /
water separator
Change gearbox oil
Check all external nuts, bolts and
fastenings are tight. Check belt tension
and alternator bolts. Check for leaks.
Change engine oil
Change oil filter
Lubricate keyswitch on control
panel with "Vaseline" or WD40
Check coolant "sacrificial" zinc anode
and replace if necessary - sometimes
frequently
Check general condition
Remove heat exchanger tube stack
and replace rubber o-rings
Check sea water pump impeller
and change if worn
Check air cleaner element
and change if required
Change air cleaner element
Change diesel fuel filter
Change gearbox oil
Drain and replace engine
coolant/anti-freeze
*Check condition every year and change when neccessary.
Daily or After
every 8hr first
running 25hrs
51
After Every
first 150hrs with
50hrs shallow sump
See separate gearbox manual
Every Year Every Year
or 250hrs or 750hrs
if sooner if sooner
*