Configuration - GE IC695CNM001 Quick Start Manual

3. Configuration

You will need:
■
PACSystems CPU Firmware 7.70 or later.
■
SYCON.net configuration software, available from Hilscher.
Refer to their website: http://www.hilscher.com. Search for
"Communication Solutions DVD for cifX, comX and netJACK."
■
Device driver for the CNM001 module USB connection.
(Available on the "Communication Solutions DVD for cifX,
comX and netJACK" DVD.)
■
Mini USB cable for connecting SYCON.net to the module.
■
Proficy Machine Edition configuration and programming
software from GE Intelligent Platforms, version 7.00 or later.
■
Serial or Ethernet cable for connecting the Proficy Machine
Edition programmer to the RX3i CPU.
■
EDS files for the slave devices in your system, available from
the device manufacturers.
■
PACSystems RX3i CANopen Master Module User's Manual,
GFK-2831, available
10 PACSystems* RX3i CANopen Master Module Quick Start GFK-2837
fromhttp://www.ge-ip.com/support.