Failure Notification; Raid Report Service; About The Service; Installing The Service - NEC Express 5800 Series User Manual

Failure Notification

RAID Report Service

About the service

RAID Report Service notifies OS log (Windows: Event Log, Linux: syslog) of the event which occurred to RAID
Controllers and attached devices in Windows and Linux.
This utility alerts influential events to NEC ESMPRO Manager by event monitoring system of NEC ESMPRO
ServerAgentService. Install RAID Report Service, NEC ESMPRO ServerAgentService and set SNMP Service to
send traps, then NEC ESMPRO ServerAgentService automatically alerts events of RAID system reported by
RAID Report Service.
IMPORTANT: Use the RAID Report service, following setting:
 iLO Web: Encryption -> Security Settings -> Production. (HighSecurity or FIPS, RAID Report
 For more information about NEC ESMPRO Manager and NEC ESMPRO ServerAgentService,
 About the alert which notify to NEC ESMPRO Manager, see

Installing the service

IMPORTANT: Before install RAID Report Service, you have to install NEC ESMPRO
ServerAgentService and SSA CLI. If confirm the installation procedure, see NEC ESMPRO
ServerAgentService Installation Guide and
IMPORTANT: When RAID Report Service install, you should use the latest install module. See
NEC Corporate Website (http://www.nec.com/) and confirm whether the latest module is
released. If NEC Corporate Website doesn't release a module, the latest module is in the Starter
Pack.
IMPORTANT: When RAID Report Service version update, install after uninstall old module.
Confirm a module version
target
Installed module
website release module
Starter Pack inside
Service can't be used.)
see document of each software.
message.
"Install SSA".
procedure
version.txt in install directory
each release memo
mount Starter Pack and see this file:
/software/{revision}/{OS}/raidsrv/ExUpInfo.xml
<version>X.XX Rev.xxxx</version>
※{revision} depends on the Starter Pack version.
RAID Report Service notice
Failure Notification 97