Configure the controller. See
3.
When prompted, save the configuration.
4.
Do one of the following:
5.
o
Configure an additional controller. Repeat steps 3 through 5.
o
Click Exit SSA.
Enabling or disabling SSD Smart Path
This Task is not supported.
Rapid Parity Initialization
Initializing rapid parity
Procedure
Open SSA.
1.
For more information, see
Open the Configure panel by doing one of the following:
2.
o
Choose a device and click Configure in the quick navigation menu.
o
Select an available device from the Home screen, and then click Configure under the available
options.
Select Logical Devices from the Devices menu.
3.
A list of arrays appears.
Select an array, and select Create Logical Drive from the Actions menu.
4.
"Performing a Configuration
"Using the SSA
GUI."
task."
SSA graphical user interface 19