JVC KD-AV7005 Service Manual page 50

4.2.10 Touch panel manual operation proofreading procedure
Procedure 1 Proofreading
(1) Set the main unit in a touch panel proofreading mode.
(2) Push the center of the figure of a cross in a circle of green (81h to 89h) on the panel in turn.
a) Push for each 3 points of the upper part of 81h and 82h and 83h with a thumb of the right hand (or, left hand) on the
panel from a direction.
b) Push 84h with a thumb of the left hand from the left course.
c) Push 85h with the middle finger of the right hand or the middle finger of the left hand from center direction.
d) Push 86h with a thumb of the right hand from the right course.
e) Push for each 3 points of the lower part of 87h and 88h and 89h with a thumb of the right hand (or, left hand) under the
panel from a direction.
(3) When proofreading was completed normally, OK is displayed.
(4) Repeat since a beginning when NG was displayed.
(5) After proofreading completion, turn off the power supply and confirm it again.
Procedure 2 Confirmation
(1) Switch on the main unit and turn the main unit into normal movement.
(2) Push a screen key of GUI and set the main unit in the mode that "NAME" is displayed in the right bottom.
(3) Push "NAME" in order to let a screen display a keyboard of British number and push all keys in order to confirm misrecognition.
(4) When misrecognition occurred, proofread it since a beginning.
1-50 (No.MA101)