From The Main Body In The Direction Of The Arrow. (See Fig - JVC KD-AV7005 Service Manual

3.5 Hideaway unit section
3.5.1 Removing the top chassis
(See Figs.11 to 3)
(1) From the both sides of the main body, remove the four
screws A attaching the top chassis. (See Fig.1 and 2.)
(2) From the front side of the main body, remove the three
screws A, screw B and four screws C attaching the top
chassis. (See Fig.3.)
(3) Take out the top chassis from the main body in the direction
of the arrow. (See Figs.1 to 3.)
3.5.2 Removing the DSP board
(See Fig.4)
• Prior to performing the following procedures, remove the top
chassis.
(1) Remove the four screws D attaching the DSP board.
(2) Disconnect the connector
board.
CN901 from the hideaway
Fig.1
A
Fig.2
A B A
Top chassis
Fig.3
CN901
DSP board
Fig.4
Top chassis
A
Top chassis
C A
D
Hideaway board
D
(No.MA101)1-33