JVC KD-AV7005 Service Manual page 32

3.4.11 Removing the feed motor assembly
(See Figs.21 and 22)
• Remove the front end board.
(1) Remove the feed TRI. spring on the bottom of the body.
(See Fig.21.)
(2) Remove the two screws K attaching the feed motor assem-
bly. (See Fig.21.)
(3) Remove the slit washer from the motor H. assembly and
pull out the worm wheel. (See Fig.22.)
(4) Remove the two screws L attaching the feed motor. (See
Fig.22.)
1-32 (No.MA101)
Feed TRI. spring
Fig.21
Slit washer
Worm wheel
L
Motor H. assembly
Fig.22
K
Feed motor assembly
Feed motor