JVC KD-AV7005 Service Manual page 25

3.4.4 Removing the clamper unit
(See Figs.5 to 7)
• Remove the top cover and the mechanism section.
(1) Remove the clamper2 spring on the bottom of the mecha-
nism section. (See Figs.5.and 6.)
(2) Release the part d of the clamper spring from the bending
part of the chassis base assembly. (See Fig.7.)
(3) Move the clamper unit in the direction of the arrow and turn.
Release the two joints e and f, then remove the clamper
unit upward. (See Fig.5.)
Clamper spring
f
Clamper2 spring
Chassis base assembly
Clamper2 spring
Clamper unit
Clamper unit
g
e
Fig.5
Chassis base assembly
Fig.6
Clamper spring
Chassis base assembly
Fig.7
d
(No.MA101)1-25