JVC KD-AV7005 Service Manual page 21

3.3 Display unit section
• Remove the display unit from the main body.
(See "3.1.1 Removing the display unit".)
3.3.1 Removing the display back panel
(See Figs.1 to 3)
(1) From the both sides of the display unit, remove the six
screws A attaching the display back panel. (See Figs.1 and
2.)
(2) From the rear side of the display unit, remove the three
screws A attaching the display rear cover. (See Fig.3.)
(3) Release the joints a first and relese the joint b. (See Fig.3.)
(4) Remove the display rear cover.
Note:
When releasing the joints a and joints b, take care not to
break the claws of the display rear cover. (See Fig.3.)
(5) Remove the four screws B attaching the display back pan-
el. (See Fig.3.)
(6) Take out the display back panel from the display unit.
Display back panel
Fig.1
Display back panel
A
Fig.2
a
A
a
b
B
Display back panel
Fig.3
A
a
A
B
Display rear cover
(No.MA101)1-21
A
a