Table of Contents
Advertisement
4.4
Media Format
Press [CH +/-,
•
Press [OK] and [Confirm Yes/No?] will be shown
•
This function will clear your hardware and all recorded files will be lost. Please be
caution! You have to enter default password: 0000 before formatting
4.5
Safe Remove
Press [CH +/-,
•
Press [OK] and [Confirm safe Remove?] will be shown
•
(Please [Safe Remove] before remove the HDD.)
5
Software upgrade
1. Software Upgrade Via OTA
•
2. Software Upgrade Via USB
•
a. Insert the USB memory device in PC. (the format must be FAT / FAT32)
b. Create a folder named 'PAC7101-DVBT' in a FAT32 USB memory device
c. Copy the new software to the folder
d. Insert the USB memory device into the USB port of the recorder.
e. Choose 'Software Upgrade Via USB' and press 'OK' to confirm
f.
The receiver restarts and enters the software upgrade interface.
Till the upgrade complete, the receiver will restart again.
Attention: during upgrading, do not cut off the power, otherwise
software upgrade will be fail.
] button to move cursor to [Media Format]
] button to move cursor to [Safe Remove]
38
Advertisement
Table of Contents
