Table of Contents
Advertisement
Fig.10.3.1
Fig.10.3.2
{Quick Search} : Search 9 Channels
•
{Manual}: User may input the channel frequency for channel detection.
•
{Auto}: Auto scan will be carried out and the associated programs/ channels
•
will be detected.
{Factory Default}: When the HDTV Set Top Box goes into an unknown
•
state, user may perform the factory default to reset the unit.
{Carrier Edit}: To edit the frequency of the carrier.
•
{Auto Edit}: To scan the carrier/ channels.
•
{Auto Edit}: To scan the carrier/channels.
•
3. Setup Menu
Press [CH +/-,
•
cursor and highlight the selection
{Tuning} or {Delete Carrier} or {TV
Setup} or {Time/OSD} or {Wakeup Timer}
or {Password} or {Software Upgrade}
or {Receiver Status} as shown in Figure
10.3.1.
Press [OK] to enter.
•
3a. Tuning Menu
Press [CH +/-,
•
the items you want to change shown in
Figure 10.3.2.
Country
Press [VOL +/-,
•
buttons to select the country, press [OK]
to confirm.
Service Type
Press [VOL +/-,
•
{ALL}, {FTA}, {TV Only} & {FTA TV Only};
where default selection is {ALL}.
Search Mode / Default
Press [VOL +/-,
•
{Quick Search}, {Auto Edit}, {Manual},
{Auto}, {Factory Default}, {Carrier Edit}
and {Auto Edit}; where default selection is
{Auto Detect}.
Press [OK] to execute.
•
Press [EXIT] to exit.
•
] buttons to move
] buttons to highlight
] & [CH +/-,
]
] buttons to cycle
] buttons to cycle
26
Advertisement
Table of Contents
