Table of Contents
Advertisement
9. Basic Operations
This chapter assumes that the Set Top Box has been installed correctly as detailed in the
previous section. If the Set Top Box has not been installed or connected properly, please
refer to the chapters installation & Quick Start Guide.
1. Change TV /Radio Channel
Press [CH +/-,
•
or press numeric key [0,1..9] on the remote control directly to input the channel
•
number,
or press [CH UP, DOWN] buttons on the front panel to change channel up/ down.
•
2. Change Volume Level
Press [VOL +/-,
•
3. Change TV /Radio Operation Mode
Press [TV/R] button on the remote control or on the front panel to toggle between
•
TV and Radio operation modes.
The TV/RADIO LED on the front panel will be lighted up when switch to TV mode.
•
4. Mute the Sound
Press [Mute] buttons to mute the sound (the audio bar becomes red color) as
•
shown in Figure 9.4.1.
Press it again to return normal.
•
Fig. 9.4.1
] button to change channel up / down,
] button to change volume level up/down.
14
Advertisement
Table of Contents
