Table of Contents
Advertisement
8. Quick Start Guide
Once you have connected the Set Top Box to your TV, use the following
guide to tune in the local digital TV/ radio stations and define the basic
Set Top Box setting. If you have not yet connected your Set Top Box to a
TV then please refer to the 'Installation' section. Advanced operations are
covered in the 'Main Menu" section.
Fig. 8.1.1
Fig. 8.1.2
Fig. 8.1.3
1. Tuning Local Digital TV /Radio Station
Step 1: Power Up
witch on your TV
•
Select the appropriate input on your
•
TV to view the Set Top Box output
signal
Switch on your Set Top Box
•
Set Top Box start up window will pop
•
up on TV screen
Step 2: HDD initialize
After the HDD initialization, choosing
•
the aspect ratio of TV screen, if
you don't know it ,choosing 'auto',
(aspect ratio also can be changed
with pressing key 'ARC' of remote
control unit).
Press 'ok', then auto scanning
•
Step3: Auto Channel Detect
Set Top Box searches for the local
•
carrier.
Wait until the search carrier process
•
completed
Once carrier detection completed,
•
massage of 'Scan Completed' will
be shown as in 8.1.3
Press [OK] to save setting
•
Press [Exit] to start viewing the TV
•
program
8
Advertisement
Table of Contents
