Machinery Directive; Ul/Csa Markings - ABB ACS 601 Hardware Manual

Ac drives, 3 to 150 hp, 2.2 to 110 kw
Hide thumbs Also See for ACS 601:
Table of Contents

Advertisement

Appendix A – ACS/ACC/ACP 601 Technical Data
Public Low-Voltage
Network
Ungrounded Power
(IT Network)

Machinery Directive

UL/CSA Markings

A-22
ACx=ACS/ACC/ACP
Medium voltage network
Neighboring network
Point of measurement
Low voltage
Equipment
(victim)
Equipment
Use of the ACx 600 in Second Environment without EMC filtering (EN 61800-3: second
environment includes all establishments other than those directly connected to a low-
voltage power supply network which supplies buildings used for domestic purposes.)
1. The ACx 600 is equipped with EMC filtering (refer to Table A-1).
2. The ACx 601 is installed with motor and control cables as specified in this
manual.
3. Maximum cable length is 100 meters.
Without considering the EMC requirements, do not use the ACx 600 on a low voltage
public network supplying domestic premises. This kind of use might cause radio
frequency interference.
1. It is ensured that no excessive emission is propagated to neighboring low-voltage
networks. In some cases, the natural suppression in transformers and cables is
sufficient. If in doubt, the supply transformer with static shielding between the
primary and secondary windings can be used.
2. The ACx 601 is installed with motor and control cables as specified in this
manual.
Note: The ACx 600 must not be equipped with EMC filtering (refer to Table A-1) when
installed to floating networks. The power becomes connected to ground potential
through the EMC filter capacitors. In floating networks this may cause danger or
damage the unit.
ACx 601/604/607 drives comply with the European Union Machinery Directive (89/392/
EEC) requirements for an equipment intended to be incorporated into machinery.
The UL/UL
/CSA markings of the ACS 600 drives are listed below (x).
C
ACx 600 Type
ACS 601 (IP 22)
1)
400 V, 500 V and 600
V ranges
ACS 601 (IP 54)
ACS 604 frame sizes R7 to R9
1)
400 V, 500 V and 600
V ranges
ACS 604
600 V parallel connected units
1) the approval is valid up to 600 V
Supply transformer
Static shield
Low voltage
ACx 600
Equipment
UL
UL
CSA
C
x
x
x
x
x
pending
x
x
x
pending
pending
pending
ACS/ACC/ACP 601 Drives

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acc 601Acp 601Acs 600

Table of Contents