Inquiries - ABB ACS 601 Hardware Manual

Inquiries

ACS/ACC/ACP 601 Drives
Character Meaning
no.
17 Degree of Protection
0 = IP 00 (chassis), A = IP 21, 2 = IP 22, 4 = IP 42,
5 = IP 54, 6 = IP 00 with Coated Boards,
7 = IP 22 with Coated Boards,
8 = IP 42 with Coated Boards
9 = IP 54 with Coated Boards
B = IP 21 with Coated Boards
18 Line Input and Protection Options
19 Starter for Auxiliary Motor Fan
20 Filters
0 = CE with EMC Filters (not for 690V or 12-pulse
rectifier)
3 = CE with output dv/dt Filters + EMC Filters (not for
690V)
5 = Output dv/dt Filters + no EMC Filters
8 = US Standard, US conduit: No CE, no EMC filters,
9 = CE Low Voltage and Machinery Directives; No EMC
(ACS 607 only, secondary of all transformers
220 VAC)
21 Braking Chopper and Cabling Direction
0 = No Brake Chopper - Bottom Entry / Bottom Exit (BE/
BE
1 = Brake Chopper (BE / BE)
3 = Input Power Top Entry / Output Power Bottom Exit
4 = Input / Output Power Top Entry / Exit
5 = Option 1 and 3
6 = Option 1 and 4
22 Other Options
0 = None, 1 = Version 5.0 Software
Any inquiries about the product should be addressed to the local
distributor or ABB representative, quoting the type code and the serial
number of the unit. If the local ABB representative cannot be
contacted, inquiries should be directed to the address and phone
numbers on the back cover of this manual.
Chapter 1 – Introduction
Refer to
Appendix A:
Enclosures
Appendix A:
CE marking
ACx=ACS/ACC/ACP 1-3