Using The Lun Manager - Hitachi AMS 2100 Hardware Manual

Using the LUN manager

Using LUN Manager on a fabric switch connection
When connecting to the servers (HBA) or exchanging the HBA:
1. Configure the LUN Manager settings including the WWN registration
2. Connect the servers that can access the array.
3. As shown in the following illustration, set the Zoning on Fabric switch
7–42
to change the access from HBA that cannot be access to Disk Array by
LUN Manager.
Host-A
HBA#1
Fabric Switch
Port 0A
CTL 0
Configuration
Hitachi AMS 2100/2300 Storage System Hardware Guide
Host-B
HBA#2 HBA#3
Port 0B Port 1A
LU0（HBA#1，
HBA#2）
LU1（HBA#3）
HBA#4
Port 1B
CTL 1
：
Zoning